Document Library

Clean frequently using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth.

Proper care and careful use are the best methods of maintaining the appearance, finish, and function of any product. Periodic inspection of the product is recommended. Every 6 months, inspection of attachment hardware is recommended to ensure seating safety. If your chair has arms, the fasteners attaching the arms to the underside of the seat should be periodically tightened.

The easiest way to determine the correct method for cleaning your upholstery fabric is to refer to its fabric cleaning code. You will need to know the fabric supplier and pattern name in order to obtain the code from their website, or through their customer service personnel. The KI fabric code can be found below the item number on the white product label.

Regular cleaning or dusting can be accomplished using a slightly damp, soft, lint-free cloth wiping in the direction of the wood grain. Always wipe dry immediately with a dry, clean, lint-free cloth. Avoid using any cleaners containing abrasives or corrosive agents.

To clean, use a mild solution of water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry cloth.

It is recommended that frames and finished surfaces be kept dry and away from water, rain, ice, snow, salt, and direct sunlight. Clean using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth. Wax or furniture polish may be applied after cleaning.

Markerboard laminate should be cleaned periodically to remove all dry ink residue and prevent ghosting. Ink should be completely dry before erasing, as attempting to erase wet ink can cause smearing and ghosting. Always use a dry eraser or a soft cloth to remove the marker. Remove residue with a soft cotton cloth and a mixture of warm water and mild detergent followed by a clean water rinse.

For glass panels, clean with warm water or a mild soap solution and a lint-free cloth (terry cloth). Conventional, non-abrasive glass cleaners may also be used except on sandblasted, etched or filmed glass. For fabric panels, refer to the associated fabric cleaning code.

Follow standard instructions for routine and spot cleaning. Cleaning agents and disinfectants should be approved by the appropriate department(s) within the facility.

For clear glass, clean using Windex® Original Glass Cleaner. For etched glass, clean using a clean, soft cloth rag soaked in water and wipe down etched glass. Allow water to evaporate.