Skip to nav Skip to content

Document Library

Document Name Type Item No.
All Terrain Screens Care and Use Instructions Label
Care & Maintenance KI-CM-000015
Link copied to clipboard

Plastic Finishes Care & Maintenance
Care & Maintenance KI-CM-000012
Link copied to clipboard
More Info

Clean frequently using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth.

Seating Finishes Care & Maintenance
Care & Maintenance KI-CM-000005R2
Link copied to clipboard
More Info & Archived Versions

Proper care and careful use are the best methods of maintaining the appearance, finish, and function of any product. Periodic inspection of the product is recommended. Every 6 months, inspection of attachment hardware is recommended to ensure seating safety. If your chair has arms, the fasteners attaching the arms to the underside of the seat should be periodically tightened.

Archived Versions
Fabrics Care & Maintenance
Care & Maintenance KI-CM-000007
Link copied to clipboard
More Info

The easiest way to determine the correct method for cleaning your upholstery fabric is to refer to its fabric cleaning code. You will need to know the fabric supplier and pattern name in order to obtain the code from their website, or through their customer service personnel. The KI fabric code can be found below the item number on the white product label.

Wood Finishes Care & Maintenance
Care & Maintenance KI-CM-000014
Link copied to clipboard
More Info

Regular cleaning or dusting can be accomplished using a slightly damp, soft, lint-free cloth wiping in the direction of the wood grain. Always wipe dry immediately with a dry, clean, lint-free cloth. Avoid using any cleaners containing abrasives or corrosive agents.

Connection Zone Screen Tension Adjustment - Acrylic Inserts
Care & Maintenance KI-62590R1
Link copied to clipboard

Markerboard Laminate Finishes Care & Maintenance
Care & Maintenance KI-CM-000010R2
Link copied to clipboard
More Info

Markerboard laminate should be cleaned periodically to remove all dry ink residue and prevent ghosting. Ink should be completely dry before erasing, as attempting to erase wet ink can cause smearing and ghosting. Always use a dry eraser or a soft cloth to remove the marker. Remove residue with a soft cotton cloth and a mixture of warm water and mild detergent followed by a clean water rinse.

Membrane Pressed Surfaces Finishes Care & Maintenance
Care & Maintenance KI-CM-000011
Link copied to clipboard
More Info & Archived Versions

To clean, use a mild solution of water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry cloth.

Archived Versions
Powder-Coated Paint Finishes Care & Maintenance
Care & Maintenance KI-CM-000013
Link copied to clipboard
More Info

It is recommended that frames and finished surfaces be kept dry and away from water, rain, ice, snow, salt, and direct sunlight. Clean using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth. Wax or furniture polish may be applied after cleaning.

Architectural Wall Finishes Care & Maintenance
Care & Maintenance KI-CM-000001R1
Link copied to clipboard
More Info & Archived Versions

For glass panels, clean with warm water or a mild soap solution and a lint-free cloth (terry cloth). Conventional, non-abrasive glass cleaners may also be used except on sandblasted, etched or filmed glass. For fabric panels, refer to the associated fabric cleaning code.

Archived Versions
Filing, Storage & Casegood Systems Finishes Care & Maintenance
Care & Maintenance KI-CM-000002R2
Link copied to clipboard
More Info & Archived Versions

Follow standard instructions for routine and spot cleaning. Cleaning agents and disinfectants should be approved by the appropriate department(s) within the facility.

Archived Versions
Fixed & Auditorium Seating Finishes Care & Maintenance
Care & Maintenance KI-CM-000003R1
Link copied to clipboard
More Info & Archived Versions

KI Fixed and Auditorium Seating requires minimal maintenance. Proper care and careful use are the best methods of maintaining the appearance, finish, and function of any product. Periodic inspection of product attachment hardware and proper furniture function is recommended (every four to six months).

Archived Versions
Glass Finishes Care & Maintenance
Care & Maintenance KI-CM-000008
Link copied to clipboard
More Info

For clear glass, clean using Windex® Original Glass Cleaner. For etched glass, clean using a clean, soft cloth rag soaked in water and wipe down etched glass. Allow water to evaporate.

Laminate Finishes Care & Maintenance
Care & Maintenance KI-CM-000009R1
Link copied to clipboard
More Info

To clean, use a mild solution of water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry cloth.

Panel Systems & Workplace Accessories Finishes Care & Maintenance
Care & Maintenance KI-CM-000004R1
Link copied to clipboard
More Info & Archived Versions

Follow standard instructions for routine and spot cleaning. Cleaning agents and disinfectants should be approved by the appropriate department(s) within the facility. Follow manufacturer's instructions for use, application, and specific product detail.

Archived Versions
Tables & Worksurfaces Finishes Care & Maintenance
Care & Maintenance KI-CM-000006R3
Link copied to clipboard
More Info & Archived Versions

It is recommended that frames and finished surfaces be kept dry and away from water, rain, ice, snow, and salt. Clean using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth.

Archived Versions
Sway Collection Care & Maintenance
Care & Maintenance KI-62706R1
Link copied to clipboard

CafeWay Tables Lubrication Care & Maintenance
Care & Maintenance KI-62660
Link copied to clipboard

CafeWay Tables Model ECRCB Care & Maintenance
Care & Maintenance KI-62656
Link copied to clipboard

Connection Zone Screen Care & Maintenance
Care & Maintenance KI-62577
Link copied to clipboard

Page 1 of 2
Jump to page Go